About Seal Tite

Seal Tite's Four-point Sealing System

The Seal Tite Collar Seal, with V-Cup or O-rings, eliminates any exposure in the collar and pin end area. There are no makeup points or hand fitting of joints. The Seal Tite Collar Seal allows you to run your string as fast as bare tubing with 100% accuracy every time. The Seal Tite Collar Seal with Teflon thread rings is the final touch to the system. This ensures no weak link in the entire string of tubing.

Simple & Quick Seal Tite Installation

• The short end of the collar seal is fitted into the collar with the long end extending out of the collar approximately 1/2", providing a stabbing point for the tubing pin end.
• Swab the collar with a small amount of pipe dope. Dip short end of collar seal into pipe dope, then insert the seal. Using a pipe dope brush, swab inside pin end for top O-ring lubrication.
• A slight downward pressure may be required to position pipe for make-up. Important: If using power tongs, make-up pipe on medium speed.

Complete Internal Corrosion Protection

Complete internal corrosion protection for above and below ground. Seal Tite is guaranteed against internal corrosion Seal Tite warranties customer's disposal and injection applications, but does not warranty commercial disposal applications, offshore applications, or hazardous waste disposal sites.